Features
This pump is designed specifically for sucking in drum cans. By inserting air at a reduced pressure of 0.4 to 0.6 MPa into the drum and expelling it from the ejector, the inside of the drum becomes negative pressure, which is then sucked in from the outside.
Attach the discharge part (the side with the hose) to the large mouth G2 of the drum, and the pressure reducing part (the side with the regulator) to the small mouth G3/4 of the drum.
Since it is an air type, it can also be used in explosion-proof areas.
Use
When you want to collect general oil into drums.
Specification
Maximum suction amount: (at 1cp viscosity) 128l/min
Usable air pressure: 0.4 to 0.6Mpa
Usable viscosity: 4,000cP or less
For closed drum can suction only
Specification2
Aqua system Inhalation only Aluminum air drum pump separate type
Material/Finish
Set contents/accessories
caution
